Selecting the correct fire extinguisher

CHELAN -The National Fire Protection Association notes that portable fire extinguishers can “save lives and  property by putting out a small fire or containing it until the fire department arrives, but portable  extinguishers have limitations.”
The three most commonly used fire extinguishers are air-pressurized water, carbon dioxide and multi- purpose/dry chemical. According to OSHA:
• Air-pressurized water extinguishers are designed to be used only on Class A fires (wood, paper,  cloth, rubber and certain plastics). Never use an APW extinguisher on  flammable liquid fires, as it may make the situation worse, or electrical  fires, as it may cause electrocution.
• Carbon dioxide extinguishers put out fires by displacing oxygen. Be aware  that pieces of dry ice will shoot from the device. Carbon dioxide  extinguishers are meant for use only on Class B fires (oils, gasoline, some  paints, lacquers, grease, solvents and other flammable liquids) and Class C  fires (electrical fires, including fires in wires, fuse boxes and energized  electrical equipment).
• Multi-purpose/dry chemical extinguishers coat the fuel element with a  thin layer of fire-retardant powder, OSHA notes. Although generally rated  for Class B and C fires, they may be marked as multi-purpose for use in Class A, B and C fires. All  fire extinguishers will be marked with labeling that identifies what class of fire it can be used on.
To use a fire extinguisher; NFPA recommends remembering to “PASS”:
• Pull the pin and hold the extinguisher with the nozzle pointed away from you, then release the  locking mechanism.
• Aim low – point at the base of the fire.
•  Squeeze the lever slowly.
• Sweep the nozzle in a side-to-side motion.


User menu

NCW Media Newspapers